I've been doing this for years. If you're off-grid in Australia and want a reliable water system that doesn't cost a fortune, this is how you do it. No fancy tech—just parts that work.
Forget the fluff. I'm off‑grid in Australia and I built a water system that works without blowing the budget. No fancy tech—just the parts that keep the water flowing.
Stock water grid: dam or bore to solar pump to header tank, then gravity-fed main line serving paddock troughs.
Float Valves: What I Do When They Jam
Float valves are the backbone. They keep your tank from spilling over. I grab the cheap plastic ones at Bunnings or Toolstation—fancy brass is unnecessary.
Get a 15mm float valve (like the $15-$25 ones at Bunnings)
Install it on the tank inlet. Not the roof tank – the storage tank. Duh.
Test it. Fill the tank. If it doesn't shut off at the right level, replace it. Don't wait for a flood.
Pro tip: Put a bucket under the valve during installation. You'll thank yourself when it leaks (it will).
My Plumbing Rule: Keep It Simple
Complex plumbing = more things to break. Use 20mm PVC pipe. It's cheap, Australian-made, and won't melt in the sun.
Run pipe from the roof tank to the storage tank. Use 90-degree bends, not elbows. Less chance of blockages.
Use solvent weld (like PTFE tape) on all joints. No glue. Just tight fits.
Put a 10mm tap at the bottom of the storage tank for emergency draining. $10 at Bunnings.
I steer clear of copper – it’s overkill and costs twice as much. PVC does the job for rainwater without the price tag. If you’re pulling water from a bore, fit stainless steel; that’s another conversation.
My Backup Pump: It’ll Fail, Here’s My Workaround
It's not if your system fails. It's when. Have a backup plan that costs less than a coffee.
Keep a 200L drum (like the $50 ones from Farmbarn) as emergency water. Fill it from the mains when you can.
Install a manual override tap on your main pipe. If the float valve jams, turn it off and use the drum.
Never rely on solar pumps. They break. Stick to gravity feed. It's why we're off-grid.
If you're in a drought zone, get a second tank. Seriously. $200 for a 500L tank at Toolstation is cheaper than a water truck.
What my 2023 off‑grid water kit actually cost me
Here's what you actually need to spend (no markups):
Float valve: $20 (Bunnings)
20mm PVC pipe (5m): $15 (Bunnings)
10mm tap: $10 (Bunnings)
200L drum: $50 (Farmbarn)
Total: $95 (before you even turn a wrench)
Don't buy "off-grid kits" from online stores. They're overpriced by 300%. Do it yourself.
What the system costs and saves
I don't treat stock grid water like rocket science. It runs on cheap Aussie gear: Float valves, PVC pipe, and a backup drum. No apps. No subscriptions. Water appears when you need it.
If you're spending more than $100 on this, you're getting ripped off. Do it right. Or don't bother.
When I hand the job to a licensed tradie
While many off-grid projects are achievable as DIY, certain situations require licensed professionals:
Electrical work beyond basic 12V DC additions — requires a licensed electrician
Structural modifications to buildings or load-bearing elements
Gas line installation or modification
Solar array installations above safe voltage thresholds
Any work that affects the structural integrity of your property
Always check local regulations and obtain necessary permits before commencing work.
It walks through sizing a header tank and wiring a 12 V on‑demand pump, showing real pressure readings and flow‑rate numbers you can apply directly to your own off‑grid setup.— Sarah Chen